SHEENSTAR Company has just completed the production of glass bottle drinking water filling machine, which is used to fill drinking water into glass bottles, such as pure water, mineral water, etc. This machine equipped with a semi-automatic bottle sorting machine. The customer sent us four kinds of bottle samples for testing the glass bottle filling machine.
SHEENSTAR tested the glass bottle filling machine as per the requirement of customer, and showed the filling machine operation to the customer by WECHAT app. The customer was very satisfied with the glass bottle filling machine from SHEENSTAR COMPANY.
The main features of the glass bottle filling machine are:
1. The glass bottle filling machine adopts a special filling valve and a high-power vacuum pump to ensure the same liquid level after filling.
2. The glass bottle filling machine seals the mouth of the bottle when filling, and the liquid flows down the bottle wall, which effectively controls the foam caused by the impact of the liquid during filling and prevents the liquid from overflowing.
3. Glass bottle filling machine: This machine has variable frequency speed regulation and fast filling speed. It is equipped with overload protection device. It stops when the bottle is jammed and starts soft start. It adopts an elastic bottle holding device to reduce bottle damage.
4. The filling volume of the glass bottle filling machine is adjusted by adding or subtracting the gasket on the filling valve, which is convenient and quick.
5. Glass bottle filling machine This machine has a large filling range, and the filling volume can be adjusted between 100-1500 ml.
6. The glass bottle filling machine is suitable for a wide range of bottle heights, which can be adjusted between 180-380 mm.
7. The filling valve of the glass bottle filling machine is easy to disassemble and clean.
This glass bottle cap is made of aluminum, we also provide glass bottle filling machine suitable for screw cap and crown cap. Welcome friends to inquire our machine.